yul
/
uni_d_ete_log_2022
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
uni_d_ete_log_2022/README.md

5.2 KiB
Raw Blame History

2022-09-12

  • Oximeter reading done!

2022-09-08

  • Callback still not entered
  • final_results now varies between 2 values depending on the attachment or inattachment of the oximeter clicker.
  • However the value final_results is still nonrepresentative of the oxigen level of the finger placed on the sensor

2022-09-07

[ ] Fix the callback and the calling of it on oximeter and have a reading that is not 92.

2022-09-06

Problem/Confusion:

The yu-capteurs version of function i2c_master_write doesn't transfer nonblockingly correctly. The return value of I2C_MasterTransferNonBlocking(EXAMPLE_I2C_MASTER, &g_m_handle, masterXfer) is not kStatus_Success.

Link

Several things could be the cause of it:

  • Badly configured masterXfer variable
  • Badly configured handler g_m_handle
    • extern not done properly maybe? maybe I should use static?
  • EXAMPLE_I2C_MASTER incorrect

After modifying the oximeter2_init function and changing the EXAMPLE_I2C_MASTER's MSTDAT value to 0x46(the correct value), the value goes back to the previous wrong value after I2C_MasterTransferNonBlocking in i2c_master_write.

To be more precise, 0x46 is changed to 200 after I2C_EnableInterrupts(base, (uint32_t)kI2C_MasterIrqFlags) in function I2C_MasterTransferNonBlocking.

Another observation is that the value final_result read in function oximeter2_logs_results is always 92, regardless if the click sensor oximeter2 is connected to the board or not.

The I2C_MasterTransferNonBlocking in function i2c_master_write_then_read would return kStatus_I2C_Busy because the transaction is in progress. This is related to the problem of being stuck in while(!g_MasterCompletionFlag) (for the moment this while loop is commented out).

Task for tomorrow: figure out why oximeter2.c callback function is not entered.

2022-09-05

yu-capteurs branch in function "oximeter2_read_data" optimisation

Context: The library "oximeter2.h" on branch yu-capteurs is essentially the same thing as the example code from the official github repo of MikroElektronika except a few modifications.

There are modifications because the cod on this gitlab branch yu doesn't use the "drv" libraries. The code connecting the drivers of the nxp mcu sdk and the example code provided by mikroelektronika has to be reinvened.

Problem/Confusion:

The function oximeter2_read_data from the MikroElektro official oximeter2 library has 4 register value catchers catching readings from the 4 channels(PD_{1,2,3,4}).

I received warnings of "variable 'reg_addr{1,3}' set but not used".

Will removing these two variables affecting anything?

2022-août-30

L'objectif du jour: Lire un registre de l'oximètre via I2C. (sans succès)

2022-août-29

L'objectif du jour: Découvrir le capteur oximètre 2 qui est une partie d'une LPC55S16 d'application 2 "centre de mesures".

  • Le LPC55S16 "doit faire des mesures à la fréquence programmée" via l'oximètre connecté.
  • Possibilité de forcer une acquisition. Ce forcement démarre le cycle de mesure.
    • Probablement forcer depuis le tableau de bord.

To-do list for being able to read measurements from the oximeter 2

[x] Familiariser avec la bibliothèque d'i2c "fsl_i2c.h".

[ ] Implémenter la communcation entre le LPC55S16 et l'oximètre 2 en utilisant cette bibliothèque.

CLICK ME IF YOU ARE CURIOUS

LPC55S16-EVK setup

"The I2C interface of the codec is routed to Flexcomm 4 of the LPC55Sxx, the same connection as used for the other I2C devices on the board." (from "LPCXpresso55S16 Development Boards User Manual")

Donc "I2C_MasterTransferCreateHandle(I2C4, &a_i2c_master_handle_t, i2c_master_callback, NULL);"

Oximeter 2

Oximeter 2 utilise l'ADPD144RI pour la détection par photopléthysmographie de l'oxygénation du sang.

ADPD144RI

Son adresse d'esclave est 0x64.

Il n'a pas un who_am_i.

The ADPD144RI samples bursts of synchronous pulses in two independent time slots, Time Slot A and Time Slot B, which occur sequentially within a sample period.

A burst accumulator sums the pulse energies into a 20-bit value. The number of pulses in each time slot is set in the top octet of Register 0x31 for Time Slot A and Register 0x36 for Time Slot B. Each time slot can contain 1 to 255 pulses.

Les Registres Importants

Example_SpO2_Setup_File Page 22 de 34 de "ADPD144RI(Rev.A)"

Useful Tutorials from the Official nxp website

Keywords: secure TLS; WiFi; MQTT; openssl; Mosquitto